In accordance with the art. 13 section 1 and 2 of the European Parliament and Council Regulation 2016/679 of the 27th April, 2016 on the protection of natural persons, with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation), hereafter RODO, I hereby inform that:
1. EVERMOTION S.C., 8 Przędzalniana Str., 15-688 Białystok, Poland is the Administrator of your Personal Data (APD)
2. Data Protection Inspector can be reached through e-mail: iod@evermotion.org
3. Your personal data are to be processed on the basis of art. 6 section 1 letter a, b and f of RODO in order to: a) prepare, conclude and execute the agreement and for other purposes approved by you, b) to execute the legitimate interest like marketing of products and the agreement, claim assertion or defence against claims resulting from the law regulations.
4. Entities entitled to the reception of your personal data may be the authorised public bodies; mail providers; providers of the services covered by the agreement; responsible for debt recovery, keeping the archives, document utilization, legal consulting, technical services, IT services and accountancy.
5. Your personal data shall not be transferred to the third country, nor to the international bodies.
6. Your personal data shall be processed within the period of the agreement and upon your additional consent until you withdraw it. APD shall keep the data for the period of any civil law claim execution connected with the agreement.
7. You have the right to demand an access to your personal data, to correct or to delete the data if there is no other basis for the processing or any other purpose of such processing or to limit the processing of the data, to transfer the data to another administrator and to raise objections to the further data processing if there is no legal basis for further processing and to withdraw any previous consent.
8. You provide the personal data voluntarily, however they are necessary to conclude the agreement. The refusal of providing such data may result in the refusal of the agreement conclusion.
9. You have the right to lodge a complaint to the Personal Data Protection Office when in your opinion the data processing violates the regulations of General Data Protection Regulation of the 27 April, 2016 (RODO).
10. Your data will be automatically processed, including the form of profiling. 11. You are obligated to forward above mentioned information to your representative, especially if you appointed this person in the agreement as the contact person or as the representative for the agreement execution.
Before I begin, I would like to thank Evermotion for publishing this "making of" my work.
Modeling
The following are several modeled objects used in this scene along with their respective materials.
The arches are composed of a multi sub-object material of which I only show the concrete I used. The red concrete and borders have the exact same settings but with different textures.
The settings for the concrete are: Hilight Glossiness 0.9 Refl. Glossiness 0.6 BRDF - Ward Bump channel 5.0 units using a normal map of corrugated concrete texture
Front Arch, textured using the unwraping tecnique with the following settings: Refl. Glossiness 0.79 BRDF - Ward Bump channel 15.0 units using the same texture from the diffuse map.
This is the map along with the material I used for the arch, the settings are: Refl. Glossiness 0.79 BRDF - Ward Bump channel 15.0 units using the same texture from the diffuse map.
Capital, in which I used a displacement map, the settings are: Refl. Glossiness 0.75 BRDF - Ward Bump channel 55.0 units using the same texture from the diffuse map. Applied a displacement map suing the same texture from the diffuse map but in black & white and high contrast.
One common uncertainty is when to use bump maps, a regular bump map, normal maps or displacement maps. In this case I wanted to show the column capital as if it was modeled in 3d so I decided to use displacement.
No big mistery for the floor, the settings are: Refl. Glossiness 0.89 BRDF - Blinn
The displacement map was done with imperfect white lines for the grout. I erased them a little to make them look worn.
The colums have this map that you see in black & white inside the reflection channel with a value of 20.0 units, the other settings are: Refl. Glossiness 0.79 BRDF - Blinn No Bump
Lighting
I didn't use any HDRI for the illumination of this scene. Basically, I have a vraysun light which enters from the roof with these settings:
Turbidity 3.0
Ozone 0.35
Intensity multiplier 8.0
Size multiplier 1.0
There is an aiding light at the roof (vray light plane), with an intensity of 2000 units, color (RGB 0,0,255), casting shadows, invisible, ignoring light normals and having checked affect diffuse, specular and reflections.
Two more lights on the sides of the scene with different intensities (1500 units on the right and 1000 units on the left). I think not having the same light intensity on both sides gives the scene more interest.
Lastly there's a frontal light behind the camera with 150 units offering little illumination to the scene but using it to be able to obtain a few reflection and reflaction passes at the end and thus giving the objects and the floor much more intensity in post production.
The final settings are simple, practically the ones by default when we turn on the GI.
POST PROCESS
For this particular image, these were the passes I made: - Occlusion- Gives more life to your image defining corners and objects with bump maps and displacement. - Render ID- Great help for post production. You can select individual objects to enhance levels, color balance, etc. - Shadows- Gives you more control over the shadows in the scene. You can play around with different channels and opacities in Photoshop. - Object ID- You are able to assign different IDs to separate objects. In this case I singled out the capitals. - Reflection & Specular- You can normally use these channels in "Screen" mode in Photoshop to add realism to highlights. - Z-depth- You can achieve depth of field in your images with this channel.
This is an animation of the Post Production done in Photoshop starting from the raw rendering until the final result. Thank you and I hope you find some use in this mini tutorial.
In landscape architecture, digital tools enhance precision and creativity. 3D modeling has become an essential tool for architects and designers to visualize and refine their projects with unprecedented accuracy and detail.
In the rapidly evolving world of computer graphics (CG), mastering advanced 3D modeling techniques is crucial for creators seeking to enhance their work.
Achieving realism and striking visuals in digital art and design has become increasingly crucial. With tools like Photoshop, creators have powerful software capable of transforming ideas into vivid, lifelike images.
Starting the journey of 3D modeling allows for a world of creativity and precision. Whether you aim to create beautiful visual content, design intricate models, or simply bring your imagination to life, choosing the appropriate tools and software is essential.
Thanks for the comments!
Yungoklo: the settings for the vray physical camera are the default ones. I just changed the custom color balance to a little bit yellow, the rest is the same.
COMMENTS